1. The economic type machine is a set of abrasive belt grinding head structure. The sanding belt rotates at high speed and quickly moves from side to side, which can quickly grind the surface of metal profiles and plates, remove oxidation skin, remove slag burrs, repair pits and scratches, and process such as wire drawing and hair pulling. The machine is equipped with belt conveyer, through grinding, one person can put the material at the import, and the export material will fall into the material basket automatically.
2. The equipment is divided into two kinds of grinding methods: water grinding and dry grinding. The water grinding equipment is equipped with a paper belt filter to filter the grinding iron slag impurities, water recycling, energy saving and environmental protection; the dry grinding equipment is equipped with an environmental protection dust extractor to reduce environmental pollution and protect the operator's health.
3. Equipment support customization: custom magnetic adsorption or vacuum adsorption machine, grinding smaller workpieces; custom other multi-station combination (multiple sets of abrasive belt combination, abrasive belt plus + polishing wheel, etc.), polishing and drawing quality, higher efficiency; custom other processing width or thickness of the machine; optional auxiliary configuration, such as multiple machine combinations, increase the front and rear conveyor series cylinder, automatic loading and unloading institutions to form a production line.
4. Belt grinding machine: the combination of three sets of high-precision abrasive belt wheel grinding head, can be a one-time flatness error of 0.5mm workpiece grinding to the error accuracy of 0.1mm, such as the material itself flatness is good (error 0.1mm), the highest precision after grinding can be controlled within 0.03mm. If the combination of abrasive belt and grinding wheel is customized, the highest precision can be controlled within 0.02mm; the front and back grinding machine can be customized to grind the front and back end of the product at the same time; the product grinding and deburring and chamfering combination machine can be customized to reduce the process and save the cost of use; this equipment can be widely used in the rough grinding process of precision parts, and compared with the grinding wheel type grinder, the cost of use is lower (less than one-fifth), and the efficiency is higher (more than the grinding wheel grinder). Higher efficiency (3-5 times higher than grinding wheel grinder), more energy saving and environmental protection. It is more convenient to use.
The equipment is developed and manufactured by Wanchuang independently, and Wanchuang has full independent intellectual property rights, and the whole machine has been authorized to patent, so imitation is prohibited.
Applicable Scope:Metal plate, profile cutting parts, welding parts, stamping parts polishing, drawing, brushing, deburring, removing oxidation skin, removing weld slag welding slag, deburring and other processes; equipment can also be applied to non-metal plate type workpieces such as plastic, nylon, wood, stone and other polishing and polishing.
Machining width:5-650mm
Processing thickness:0.5-50mm
Processing length:100-5000mm
Feeding speed:0.5-10m/min(Variable frequency adjustable)
Conveyor Belt:Abrasive high temperature resistant rubberL4200*w660*T8mm
Sanding Belt:860×1960mm, 1800r/90s
Height adjustment:Conveyor bed automatic lifting
Location method:Press roll positioning
Control System:Magnetic scale controller, switch button control
Supply Voltage:Three phase five wire、380V,50Hz
Power Rating:10KW(With vacuum blower)
Air pressure:0.6bar
Length, width and height:L1800*w1300*1750mm
Total weight (approx.):2.5T